We hope you like our new website!


Liner Protection System Options


Since 1992 we have developed 5 different ways of protecting your liner.

We will outline and review them here!

These 5 liner protection concepts use different products, different Ultimate Rink designs, systems and configurations of assembly and all are dependent on the style of your rink build.


1.Order a liner one size bigger then you need and leave it with 1 fold (still folded) in the bottom of your rink lengthwise. Then create a 2nd fold width wise and lay it against your grass, the rink bottom at the deep end….. or vise a versa. Then fill with water. The water will hold “the fold” down as it fills. The water will turn to ice, you will skate and play and now you have extra liner saved for next year. The ice melts, you trim off the damaged part and “presto” you now have virgin poly that was hiding under your ice. If you typically need a 32′ wide order a 40′ wide, if you need a 25′ wide order a 32′ wide etc. Remember your 5′ of extra length as well to take care of your ends.

2.With our Classic Rink Stake you would be able to install your liner outside the frame of your ice rink creation and yes protect it. These are on sale and the best price rink stake ever. With this option you would need a outer liner guard that would essentially protect the liner by sandwiching it in place with a 1″ x 6″.

presto install classic rink stake

3. With the introduction of our 5 way Rink Stake in 2005 and a slight name change it opened up the opportunity to advance the 5 in 1 Rink Stake to a liner placement and liner protection on the inside of your rink frame. The first option was with a spruce 1″x 6″ and soon thereafter we introduced LPS (Liner Protection Kickplate). LPS is a 1/8″ thick puckboard in varying widths that was manufactured and sold on a 50′ roll. This roll was then easy to ship across the country and line the inner rink frame/boards of your rink with a white hard surface that reflects the sunshine(heat) away from your rink while protecting it from damage. With this method you then improve your rink appearance and protect your liner. Your first step to Real Rinks for Real Yards! Practical and playful!!!


liner protection
Red Line Blue Line GripnGo’s hold LPS in place at appropriate points. Water line would fill rink bottom up to GripnGo.


GripnGo supplies
Cut away image with GripnGo’s Holding Liner Protection. Just add liner and full Liner Protection (LPS)




4. As seen in the 5 Way Rink Stake Video, last option with a dbl stack of boards and your liner wrapped over the first level and than adding 2nd level with LPS. The most unique way of installation of LPS (Liner protection kickplate) and is showing here with a level site. You will be able to place your LPS at any height on your upper frame and fasten with no puncture holes on your upper tier to cover most of your rink poly on lower tier.
Liner Protection System
The liner tucks up and over the lower frame (not visible behind white poly) and the upper frame sits atop the lower edge to edge. Liner Protection is fastened to the inside face of the upper frame and hangs below covering the lower frame and liner. All screws have been fastened into the upper frame avoiding all liner punctures.
Outer perimeter view with liner showing between upper and lower framing.


5. The Tru Corners feature a built in Liner Protection Kickplate. Pro panels are made of 2 x 12’s (actual size 11 1/4″). The Liner Protection  is built into your board system and this the creme de la creme. Once Pro panels are installed they can be removed with 4 screws per seam. This is a Presto Install item. Assemble the rink frame pieces and corners in about an hour with screws depending on size, then……lay your liner in place inside your frame making sure you have enough liner height to accommodate the water level you need. (having 1 or 2 years experience with your site is best)
Start your water flow assuming you have enough support for any deep water areas. (level sites are important for this application and assembly)

Add Liner Protection Kickplate in yellow as shown below or white Kickplate at your water/ice level sandwiching the liner between creating protection for you liner.

Tru ice rink corner 25th Anniversary 2017 Edition


and when the season is done…..remove screws and all parts (about an hour depending on size)  retaining there look, color and style.  Store away for the summer.

Fast rink set up and tear down